Ansul Autopulse IQ-318 Intelligent Control Panel. The AUTOPULSE IQ-318 Agent Releasing Control Panel is designed with modularity and easy system planning. The AUTOPULSE IQ-318 can be configured with just a few devices for small building applications or for a large campus or high-rise application. Autopulse 442r ansul - websites with the topic manual system components:: ansul industrial - l&j fire welcome suppression systems product series - ansul ansul autopulse 2000 start-up - youtube ansul autopulse 442r archives - fire alarm ansul 442r manual pdf ansul 442r agent releasing panel - fire control 442r by ansul - buy or repair at. AUTOPULSE detection, control and fire suppression system release panels provide automatic 24/7 fire protection. Detection options include smoke, heat and flame detection. The control panels process detection signals from protected areas and immediately perform key operations including sounding alarms, shutting down equipment and releasing the. AUTOPULSE 542RC: Six-zone, 24 volt Agent Release Control Panel (includes backbox, power supply, technical manual, and a frame & post operating instruction sheet) for single and dual hazard clean agent applications. CAC-5X: Class A Converter Module can be used to convert the Style.
Carbon Dioxide
A fire in your facility is never pleasant. But, it doesn't have to be debilitating. Carbon dioxide, the original 'clean agent' is still economical solution, providing automatic or manual protection for Class A, B, or C fires. The only gaseous agent capable of deep-seated Class a hazard protection, versatile CO2 can flood enclosed areas or discharge directly onto burning surfaces. Intelligent control panels and detectors, such as AUTOPULSE Control System, offer alarm, auxiliary control and automatic release. To help ensure safety, all personnel must be trained on the CO2 system and warned not to enter the hazard area during discharge, or until the area is cleared. Ansul CO2Your fire protection partner, ANSUL continues to lead the fire suppression industry with a full range of quality solutions and specialized products backed by a worldwide network of the most qualified distributors in the industry.
High Pressure CO2 Systems
ANSUL High Pressure Carbon Dioxide Systems are especially effective for non-occupied hazards such as semiconductor wet benches, control room and paint lines. Whatever the application, from cylinder to nozzle, each system is custom-designed for your specific fire hazards.High pressure system use individual storage cylinders – from 35 lb. (16 kg) to 120 lb. (54 kg) capacity each – that can be manifolded together for rapid simultaneous discharge. Cylinder valves can be opened automatically or manually, and either locally or remotely using electric, pneumatic or mechanical valve actuators.
Bulk Low Pressure CO2 Systems
ANSUL PREFERRED Bulk Low Pressure Carbon Dioxide Systems are ideal for non-occupied
fire hazards requiring large amounts of extinguishing agent in a limited space. A single bulk
tank can store from ¾ to 60 tons (680 to 54430 kg) of carbon dioxide, which is maintained in
a stand-by fire-ready state.This allows the system to provide effective distribution of agent on demand. Bulk low pressure CO2 systems offer multiple discharge capabilities between recharges as an economical option.The liquid CO2 is stored in an ASME-coded pressure vessel equipped with its own refrigeration system. The temperature within the vessel is kept at approximately 0°F (-17°C) by maintaining the internal pressure near 300 psi (20.7 bar).Valve control is electro-pneumatic or manual. Each master and selector valve assembly consists of either a ball or butterfly valve, a spring return pneumatic valve operator and a three-way electronically operation solenoid valve. A listed and approved releasing control panel is used to provide automatic detection and control.
Mini-Bulk Low Pressure C02 Systems
Bridging the gap between high pressure cylinders and low pressure bulk tanks, mini-bulk tanks offer capacities of 1,000 and 1,500 lb. (454 and 680 kg). The ANSUL PREFERRED Mini-Bulk Low Pressure Carbon Dioxide Systems were developed to provide an alternative to manifolding high pressure cylinders. The tanks are configured vertically to save valuable floor space: mini-bulk tanks can provide protection for non-occupied total flood, local application hazards, hose reels or custom designs such as inerting or spurt systems.Each mini-bulk tank is equipped with a low-cost, high-efficiency, air-cooled refrigeration unit. The refrigerant media, R134a, is environment-friendly and is very efficient in this application.Most system components are interchangeable between the mini-bulk system and the larger bulk storage tank system. The system control valves operate on 24 VDC, which is compatible with most approved releasing panels.Mini-bulk tanks can be filled in place or can be removed for remote filling. When filling in place from a standard delivery truck, fill connectors can be extended to an area outside the building. The storage tanks are provided with skid-mounted bases for easy handling with a forklift.
Non-occupied Applications:
Ansul Autopulse 442r Operation Manual Diagram
- Dip Tanks
- Electric Generators
- Electric Generating Equipment
- Electrical Panels
- Marine Applications
- Spray Booths
- Waste Disposal Equipment
- Gas Turbines
- Coal Silos
- Hazardous Material Storage
- Quench Tanks
- Semiconductor Wet Benches
- Computer Room Subfloors
- Non-Occupied Control Rooms
- Coating Operations
- Paint Lines
- Wave Solder Machines
- Machining Operations
- Hose Reel Stations
- Transformer Vaults
- Dust Collectors
- Printing Presses
- Inerting Systems
